8
Customer Helpline 01904 727508
www.coreservice.co.uk
Assembly
Preparing to assemble the cylinder mower
Fit the upper handle to extension handle
Fit the upper handle with extension handle to lower handle
WARNING!
- Always take care when removing the packaging to prevent damage to you or to the cylinder
mower.
- Keep the carton in guarantee time. Always recycle the packaging in accordance with local
recycling schemes.
- Before using the tool, read the instruction book carefully.
Slide the upper handle over the two handle extensions until the holes are lined up, then secure
using the nuts and screws provided.
Align the two holes on one of the extension handle with those on the lower handle.
Secure them together using the nuts and screws provided. Repeat the process with the other
handle extension.
Now the handle is fully assembled, and ready to be attached to the mower head.
To attach the handle to the mower head, locate the two metal lugs found forward of the cutting
bar adjustment knobs. To attach the handle, insert one of the large holes in the handle arm over
the lug, then repeat the same process with the other side. It may be required to use some force
to squeeze the two arms together to allow room for locating the second arm over the remaining
metal lug.
