background image

HELPLINE NO 08448012949

4

OrIgINaL INstructIONs

sYMBOLs

the cell, battery and equipment and ensure 

correct use.

i)  Do not use any cell or battery pack which is

 

not designed for use with the equipment.

j)  Do not mix cells of different manufacture, 

capacity, size or type within a device.

k)  Keep cells and battery pack out of the reach of 

children.

l)  Seek medical advice immediately if a cell or a 

battery pack has been swallowed.

m) Always purchase the correct cell or battery for 

the equipment.

n)  Keep cells and battery pack clean and dry.

o)  Wipe the cell or battery pack terminals with a 

clean dry cloth if they become dirty.

p)  Secondary cells and battery pack need to be 

charged before use. Always use the correct 

charger and refer to the manufacturer’s 

instructions or equipment manual for proper 

charging instructions.

q)  Do not leave a battery pack on prolonged 

charge when not in use.

r)  After extended periods of storage, it may be 

necessary to charge and discharge the cells or 

battery pack several times to obtain maximum 

performance.

s)  Secondary cells and battery pack give their 

best performance when they are operated at 

normal room temperature (20°C ± 5°C).

t)  Retain the original product literature for future 

reference.

u)  Use only the cell or battery pack in the 

application for which it was intended.

v)  When possible, remove the battery pack from 

the equipment when not in use.

w) Dispose of properly.

 

To reduce the risk of injury, user must 

read instruction manual

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Indoor use only

Do not expose to rain or water

Do not burn

Always charge the battery pack 

between temperature 0

o

C to 30

o

C

Do not dispose of batteries. Return 
exhausted batteries to your local 
collection or recycling point

0

o

C-30

o

C

Summary of Contents for CDI224MN

















Reviews: