Audio-Video System
Basic Operation
Guide
Part No. 161501-14-018
1401130301
Copyright 2013 Winnebago Industries, Inc.
All rights reserved.
200-Series Class-C
NOTE: See your InfoCase for specific
operating guides for audio and
video components.
•
Turn on the 12-volt
master power (TV)
switch (located on the
video cabinet near the
TV).
NOTE: When the TV is
not in use, the TV master power
switch should be turned off to avoid
drain on the 12-volt house battery.
Set TV Sound Output
•
Use the TV Menu button to set TV
audio output to
Variable Audio
Output
. (See TV owner’s manual for
instructions.) This will connect TV
stereo sound output to the deluxe
speakers in the lounge area.
•
Volume is adjusted with the TV
remote or volume buttons.
Set TV Video Input
•
Turn TV and DVD player ON.
•
Press the SOURCE or INPUT
button on the TV or TV remote to
select “INPUT 1” or “AV1”.
•
The TV screen will
display the DVD
player logo when
the correct input is
selected.
Play DVD
•
Insert DVD into player. DVD will
begin to load automatically. TV
screen will typically show
“READING” or “LOADING”.
•
The DVD may load directly to the
main title/menu screen or it may
begin to play previews. You may be
able to skip previews if desired by
pressing the NEXT button until you
see the main menu screen.
•
When the main menu screen
appears, use the arrow buttons on
the DVD remote to select the desired
entry or press the ENTER or PLAY
buttons on the remote (or “Play”
button on DVD player) to begin
playing the feature.
•
Volume is adjusted with the DVD
remote (or volume buttons on DVD
player).
MENU
ENTER
NEXT
ENTER
T/F
ENTER
PLAY/
PAUSE
