ACCESSORIES AND PARTS OVERVIEW
Vacuum cleaner
Accessories
1.
on/off button
2.
dirt container
3.
cyclone separator
4.
dirt container & carry handle
5.
dirt bin release button
6.
auto cord rewind
7.
floor tool parking slot
8.
plug
9.
dirt bin quick release button
10.
pre-motor filter cover
11.
wheel
12.
2-in-1 tool
13.
crevice tool
14.
Combination floor head
15.
telescopic tube
16.
Hose
Warning:
Always unplug the vacuum cleaner before connecting or disconnecting the vacuum hose and accessories.
HOW TO OPERATE
Cord release
Fully unwind the power cord. A yellow mark on the power cord indicates the recommended cord length. Do
not exceed the cord length beyond the red mark.
On / off button
Insert the plug into the electrical outlet. Press the on/off switch (fig. 1/1) located on the top of the vacuum
cleaner, to switch on the vacuum cleaner and press the button again to turn the vacuum cleaner off.
Carpet cleaning
For carpet and rug cleaning, press the rocker switch on the combination floor head to raise the brushes (fig.
1/17).
Hard Floor Cleaning
For hard floor cleaning, press the rocker switch (fig. 1/17) on the combination floor head to lower the
brushes. For more efficient cleaning of hard floors, you can use a separate floor tool (fig. 1/14).
Cord rewind
To rewind the power cord, press the cord rewind button, located on the top of the vacuum cleaner, and
guide the power cord with one hand. This will prevent the cord from whipping which could cause damage or
injury.
Carry handle
Use the carry handle located on the dirt bin container to move the vacuum cleaner from room to room.
Hose Storage
For convenience there is a parking slot located at the rear of the vacuum cleaner where the floor tool, turbo
tool, telescopic tool and hose can be parked for carrying and storage. Please insert the accessories
(upholstery tool and crevice tool) onto the holder on the hose’s handle.