9
EN
BEFORE USE
1. Set up handlebars
The handlebar is equipped with a folding mechanism. This allows you to set up
and secure the handlebars or fold them back in again:
1. Open and release the quick release. To do this, pull the quick release away
from the scooter (A). The tensioner opens 180°. Then open the screw by
turning it anticlockwise (B).
2. Lift the handlebar by the handle in the direction of travel until the
bolts of the handlebar engage in the opening of the handlebar base in
the 12 o'clock position. Release the handlebar. This should now stand
independently in an upright position and be held in place by the bolts in
the openings.
3. Secure the handlebar by tightening the quick-release clockwise. Now
close the quick release by pushing the bracket away from you towards the
scooter. If the quick release cannot be closed, do not use force. In this case,
the screw is turned too far. Loosen the screw one full turn at a time and try
closing the quick release again.
4. To fold down the handlebar, proceed in reverse order.
