15.
KEYLOCK
When activated, this feature will "lock" the key of the music even when the pitch is adjusted.
16.
PARAMETER 1
Use this to adjust the parameters of the selected effect. Use this with the "shift" button (22.) to
adjust the filter effect.
17.
SCRATCH
Pressing this button will allow the user to toggle between scratch or pitch bend modes. Holding the
scratch mode button enables "jog mode". This allows the user to use the jog wheel as a fast search
which allows fast searching through a song/track.
18.
JOG WHEEL
When in pause mode, the wheel will allow the user to search/scroll through the track. When in play
mode, the wheel will act as pitch bend. If Scratch mode (17.) is enabled the wheel will allow the user to scratch
the track much like a vinyl record.
19.
EFX ON/OFF
Toggles the effect on or off.
20.
PITCH
Adjusts the pitch range on the fly.
21.
NEEDLE DROP
This is a touch sensitive pad that allows you to search through the music or jump to a specific
location. NOTE: When the LED flashes, it's an indication that the track is coming to the end.
22.
DELETE/SHIFT
Use this button to delete any hot cues that have been previously stored. Hold this button as a
"shift" button for other features in the software.
23.
HOT CUE 1
Allows you to instantly jump to a set cue position and instantly play from that cue point. Press the
button once to set the cue, and then repeat to play from that cue position.
24.
HOT CUE 2
Allows you to instantly jump to a set cue position and instantly play from that cue point. Press the
button once to set the cue, and then repeat to play from that cue position.
25.
HOT CUE 3
Allows you to instantly jump to a set cue position and instantly play from that cue point. Press the
button once to set the cue, and then repeat to play from that cue position.
26.
PITCH FADER
Allows increase or decrease of the music's tempo.
27.
X1/2
Allow the user to decrease the size of a loop in increments.To exit the loop, press the button 31.
28.
SMART LOOPS
This will automatically create a loop for a certain amount of beats, 2, 4 or 8. To exit the loop, press
the button again.
29.
X2
Allow the user to increase the size of a loop in increments. To exit the loop, press the button 31.
30.
LOOP IN
Sets a loop in position.
31.
LOOP OUT
Closes the loop to create a loop, or when in a loop will exit the loop and continue to play the track.
32.
RELOOP
Will put the track back into the last loop played.
33.
PITCH BEND -
Allows small adjustments in the tempo/pitch, this button is usually used to allow seamless mixing.
You can use this button to temporarily decrease the pitch and tempo of the music.
34.
PITCH BEND +
Allows small adjustments in the tempo/pitch, this button is usually used to allow seamless mixing.
You can use this button to temporarily increase the pitch and tempo of the music.
35.
EFX SEL
Pressing this will allow you to scroll through the software effects.
36.
PARAMETER 2
Use this to adjust the parameters of the selected effect. Use this with the "shift" button (22.) to
adjust the filter effect.
37.
SYNC
Pressing this button will automatically synchronize the BPM of the song to the same BPM of the
track playing on the other deck.
38.
SET CUE
This button will set the cue at the desired location. It will also return the audio to the last set cue
position. Holding this button will also allow the user to preview the cue point until the button is
released.
39.
CUE PLAY
Will return the track to the last set cue position and play the track.
40.
PLAY/PAUSE
