Chairman T9iSimple, User Manual

Page: 4 / 8

Setup Instructions
Step 1
Take out the chair from the box, raise the
chair back slightly and place it levelly in
the depressed U-shaped slots, then attached
the backrest to the seat with the bolt.
Take U-shaped props on the bottom of
the backrest and adjust the electric screws
and black iron pipe to the position
shown on the diagram; then fix the
bolts and the R-pin. (Please do not
carelessly adjust the electric screws)
Step 2
Insert the left armrest into the fixed slots
on the chair seat then fix the back of the
armrest with small swivel knobs.
Step 4
Check again to make sure all steps
are done properly. The chair is ready
for use.
Step 3
Find the connectors (white/yellow/pink/black)
underneath the seat cushion and connect them to
the same colored cables. Insert the right
armrest into the fixed slots on the chair
seat then fix the back of the armrest
with small swivel knobs.
03
iSimple