15
Chapter 3 Read and Write EPC
3.1 Read EPC
Click “ReadEPC” in menu to enter EPC page, click “Start” to read
tags, click “Stop” to stop reading. The EPC, RSSI, Count number and
ANT number (antenna channel) will be recorded in window as
following pic:
User could enter data in “Filter” to filter EPC of special tags, the
maximum filter DL is 96 bits. User needs to setup data, initial
address, data length and click “Set”. After filtered data has been set,
the device will read and search for the tag which has been filtered.
For example: enter 16 01 in “Data”, initial address data length is
32(bit), length
is 16(bit), select EPC in “bank”, click “Set” and click
“Start” to start scanning tags which the address start at 16 01:
