Chapter 3
32
HDD Power Down:
Shuts down any IDE hard disk drives in the system after a period of inactivity as set in
this user configurable field. This feature does not affect SCSI hard drives.
HDD Down In Suspend
In Suspend any IDE hard disk drives in the system after a period of inactivity as set in
this user configurable field. This feature does not affect SCSI hard drives.
Soft-Off by PBTN
When set to Delay 4 Sec., this function allows the power button to put the system in
Suspend, a power saving mode. When set to Instant-Off the Soft-Off by PWR-BTN
function is disabled and the computer turns completely off when the power button is
pressed.
PwROn After PwR-Fail
This allows you to set whether you want your system to reboot after the power has
been interrupted. [
Off
] leaves your system off and [
On
] reboots your system.
[
Former-Sts
] sets your system back to the state it is before the power interruption.
Available options include [
Disabled
], [
Enabled
], [
Former-Sts
].
Wake up Events
1.
Power On by PME/OnBoard LAN:
When enabled, the nVidia LAN, which is on Board, will be able to
receive a
signal and wake up the system from soft off and suspend mode. You should
connect the LAN to the RJ45 port and turn on the resume event in suspend
mode.
2.
Power On by Ring/WOL/WOM:
When enabled, a Modem (
PCI Card or Ext. Modem
) will be able to receive
a signal and wake up the system from soft off and green mode. You should
connect the modem to the COM port and call your PC to power on.
3.
USB Resume from S3
The option will allow the activity of USB device to wake up the system from
S3 power saving modes. Settings are [
Enabled
] and [
Disabled
].
4.
Power On by Alarm:
When enabled, this setting allows the system to turn back on at a designated
time of the month. User must designate date of month and time of day.
This function is only available when using an ATX power supply and the
Software Power-Off function to turn off the computer.
5.
Day of Month Alarm
6.
Time Alarm
