Award BIOS Setup Program
29
C. Init Display First
This function allows user to choose between AGP slot or VGA slot to initialise
Display first .
D. AC97 Audio
Select Enabled if you install the audio riser card.
E. AC97 Modem
Select Enabled if you install the soft modem riser card.
F. IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard drive supports block mode (most new drives do), select
Enabled for automatic detection of the optimal number of block read/writes per
sector the drive can support.
G. Power On Function
Set to Button Only to control the system power via the button on your system
case. Set to Mouse Left/Right Click to turn on the power via a PS/2 mouse, and
set to Keyboard 98, Hot Key or Password to turn on the power via keyboard.
With Hot Key and Password you must decide on which keys will turn on the
power.
H. Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system
has no floppy drive, select Disabled in this field.
I. COM2 Mode Select
This function allows you to select an operating mode for the second serial port.
(
Standard
RS-232C serial port
/IrDA SIR
1.0 specification/
Sharp IR
0.57-MB/sec
infrared port)
J. Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for the physical
parallel port.
