CHAINTECH CT-6BPV, Manual

Page: 14 / 56

Chapter 2
10
You do not need to make voltage settings because SeePU automatically
sets your CPU voltage.
5. Press Esc to return to the CMOS Setup Utility, press F10 to Save and Exit Setup
and choose 'Y' to confirm. The system will automatically reboot and during startup
you will see the correct CPU type indicated on the start-up screen screen.
Overclocking
Operating a CPU at a higher frequency than its specification allows is called
overclocking. If the CPU frequency is set at a higher frequency than its specification
allows, it may or may not run at that freqency, depending on the quality of your
CPU and the extent to which the frequency has been overset. The mainboard
manufacturer highly discourages overclocking as it may result in data loss, CPU burn-
out, system failure, etc.
Many Pentium II processors are frequency locked processors and are not able to
perform overclocking. Regardless of whether the processor is a frequency locked,
overclocking may cause some processors to hang when turning on the system. When
the processor hangs, the screen remains blank and the system does not boot. To
solve this problem, do the following:
1. Turn off the computer and then press the Home key on your keyboard
2. Turn on your computer, wait for five seconds and then release the Home key.
(Pressing the Home key allows the computer to boot at a low system speed.
For example, 66MHz external clock CPUs boot-up at 133MHz.)
3. Enter BIOS and reconfigure your CPU parameters as described in this section.
ROM PCI / ISA BIOS (2A69JC39)
SeePU & HARDWARE MONITORING
AWARD SOFTWARE, INC.
ESC: Quit
F1
: Help
F5 : Old Values
F7 : Load Setup Defaults
:Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
Figure 2-4 Figure 2-4 Figure 2-4 Figure 2-4 Figure 2-4
***** CPU Setup ******
CPU Type
: User's Define
Frequency Ratio : 3.5X
CPU Bus Frequency : 100MHz
**** System Monitoring & Alerting ****
CPU Warning Temperature : Disabled
Current CPU Temperature : 25
o
C/77
o
F
Current CPUFAN Speed : 3600 RPM
Current CPUFAN Speed : 3600 RPM
Vcore : 2.08V +3.3V : 3.34V
+5V : 5.19V +12V : 12.09V
-12V : -12.43V
Shutdown Temperature : 60 C/140 F