Award BIOS Setup Program
17
Figure 3-5 Integrated Peripherals Screen
A. OnChip IDE Device
On-chip Primary/Secondary PCI IDE
You can set this to disable the On-chip IDE controller if you are going to add
a higher performance IDE board.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (programmed Input/Output) fields let you set a PIO mode (0-
4) for each IDE device that the internal PCI IDE interface supports. Modes 0 through
4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
B. OnChip IDE Device
AC97 Audio
Select
Auto
if you install the audio riser card.
AC97 Modem
Select
Auto
if you install the soft modem riser card.
3-4 Integrated Peripherals
This section provides information on setting peripheral devices. By choosing the
Integrated Peripherals option from the Standard CMOS Features menu (Figure 3-1),
the screen below is displayed. This sample screen contains the manufacturer's default
values for the mainboard.
CMOS Setup Utility- Copyright (C) 1984-2001 Award Software
Integrated Peripherals
Item Help
Menu Level
OnChip IDE Device
OnChip PCI Device
SuperIO Device
USB Controller
USB Keyboard Support
Init Display First
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Press Enter
Press Enter
Press Enter
Enabled
Disabled
AGP
