User's Manual
12
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Chapter 3
: Select Item
Esc
: Quit
F10 : Save & Exit Setup
Figure 3-1 Setup Program Initial Screen
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Phoenix - AwardBIOS CMOS Setup Utility
Time, Date, Hard Disk Type...
Phoenix-AwardBIOS Setup Program
Phoenix-AwardBIOS ROM has a built-in setup program that allows users to modify
the basic system configuration. This information is stored in CMOS RAM so that
it can retain the setup information, even when the power is turned off.
When you turn on or reboot the system, press the Delete key to enter the Phoenix-
AwardBIOS setup program. The primary screen as shown in Figure 3-1 is a list of
the menus and functions available in the setup program. Select the desired item and
press enter to make changes. Operating commands are located at the bottom of this
and all other BIOS screens. When a field is highlighted, on-line help information is
displayed on the right side of the screen.
