Chapter 2
7NJL1 User’s Guide
23
JP5 (Power On By Keyboard):
This board can be turned on by the PS / 2 keyboard (hot key). To use this
function, select a hot key of your choice at the Hot Key Power On option under
Wake Up Events in the BIOS's Power On Management screen. You must also
set this jumper's cap to pins [
2-3
] to use this function.
CN5 [WOL (Wake-on-LAN) Connector]:
Enable the Power On by Ring selection in BIOS's Power Management Menu
to use this function. This header is used to connect an add-in NIC (Network
Interface Card) which gives WOL capability to the motherboard.
Pin
Definition
1-2
Disable (default)
2-3
Enable
Chapter 2
24
7NJL1 User’s Guide
CN5A [WOM (Wake-on-Modem) Connector]:
Enable the Power On by Ring selection in BIOS's Power Management Menu
to use this function. This header is used to connect an add-in modem card
which gives WOM capability to the motherboard.
IR 2 (IR & CIR Connector):
Select a UART Mode in BIOS's Integrated Peripherals menu the UART port
to support IR function. (See section
3.4
Super I/O Device of
Integrated
Peripherals
)
