Chapter 2
10
Auxiliary Audio-in (CN3)
This connector is for use with a secondary CD-ROM, DVD-ROM
or CDR/CDRW disk drive.
Front Panel Audio Connector (CN4A)
This connector give you the option to choose between standard
audio jack(rear panel) or use a an optional front panel audio
jack cable ext. to be plug into a special custom designed system
case. To use the standard audio jack short jumper caps to pin1-
2 and pin 3-4 (Default). To use the front panel audio jack cable
ext., simply removed both jumper caps and plug into the audio
jack cable.
AC3 Surround/ Bass Connector (CN4B)
This connector is for Surround and Bass speaker output
ext. Plug in the optional AC3 Surround/Bass jack
extension into this connector. The black colored jack is for
surround speaker output and the orange colored jack is for
bass speaker output.
WOL (Wake-on-LAN) Connector (CN6)
Enable the Wake Up On LAN selection in BIOS's Power
Management Menu to use this function. The capability to
remotely manage PCs on a network is a significant factor in
reducing administrative and ownership costs. Magic Packet
technology is designed to give WOL (Wake-on-LAN) capability
to the LAN controller. When a PC capable of receiving wake
up command goes to sleep, the Magic Packet mode in the LAN
controller is enabled. When the LAN controller receives a Magic
Packet frame, the LAN controller will wake up the PC. This header
is used to connect an add-in NIC (Network Interface Card) which
gives WOL capability to the mainboard.
To support this function, a switching power supply with
a minimum of
750mA
5VSB standby signal is required.
Rear
Panel
Front
Panel
Summary of Contents for 6VIA6
Page 33: ...30 User s Manual M e m o ...