CHAINTECH 6AIV, Manual, Page: 19 / 55

Chapter 2
16
Front Panel Audio Connector (CN4A)
This connector give you the option to choose
between standard audio jack(rear panel) or use
a an optional front panel audio jack cable ext.
to be plug into a special custom designed system
case.
To use the standard audio jack short jumper caps
to pin1-2 and pin 3-4 (Default). To use the front
panel audio jack cable ext., simply removed both
jumper caps and plug into the audio jack cable.
WOL (Wake-on-LAN) Connector (CN5)
Enable the Wake Up On LAN selection in BIOS's
Power Management Menu to use this function.
The capability to remotely manage PCs on a network
is a significant factor in reducing administrative
and ownership costs. Magic Packet technology
is designed to give WOL (Wake-on-LAN)
capability to the LAN controller. When a PC
capable of receiving wake up command goes to
sleep, the Magic Packet mode in the LAN controller
is enabled. When the LAN controller receives a
Magic Packet frame, the LAN controller will wake
up the PC. This header is used to connect an add-
in NIC (Network Interface Card) which gives WOL
capability to the mainboard.
To support this function, a switching power supply
with a minimum of 750mA 5VSB standby signal
is required.
Standard Rear Panel Front Panel