background image

25

Instruc

tion manual

This manual constitutes an integral and
essential part of the product. It must be kept with care and 
must follow the system in case of ARIANEXT is transferred to 
another owner, or in the case of the installation will be trans-
ferred.
Carefully read the instructions and warnings contained in this 
manual: they provide important information concerning the 
operation and maintenance of the device.

This appliance is designed to produce hot water for domestic use.
It should be connected to a heating system and a distribution network 
for domestic hot water, both of which must be compatible with its 
performance and power levels.
The use of the appliance for purposes other than those specifi ed is 
strictly forbidden. The manufacturer cannot be held responsible for 
any damage caused by improper, incorrect and unreasonable use of 
the appliance or by the failure to comply with the instructions given 
in this manual.
Installation, maintenance and all other interventions must be carried 
out in full conformity with the governing legal regulations and the 
instructions provided by the manufacturer. Incorrect installation can 
harm persons, animals and possessions; the manufacturing company
shall not be held responsible for any damage caused as a result.

In the event of any maintenance or other structural work in the im-
mediate vicinity of the ducts, switch the appliance off. When the work 
has been completed, ask a qualifi ed technician to check the effi ciency 
of the ducting and the devices.
Turn the appliance off to clean the exterior parts of the appliance. Do 
not use or store infl ammable substances near the installation of your 
system ARIANEXT.

Clean using a cloth dampened with soapy water. Do not use aggres-
sive detergents, insecticides or toxic products. If the appliance is used 
in full compliance with current legislation, it will operate in a safe, envi-
ronmentally-friendly and cost-effi cient manner.
If using kits or optional extras, make sure they are authentic.

In case of prolonged disuse of the system ARIANEXT:
•  Disconnect the power plug
•  Shut off the sanitary cold water supply (ARIANEXT FLEX)
• Empty the entire circuit, to avoid the water from freezing in the 

pipes

If you decide to permanently dismiss the system ARIANEXT, contact 
a qualifi ed technician, in order to carry out the decommissioning of 
the product.

SAFETY REGULATIONS

Key to symbols:

  Failure to comply with this warning implies the risk of personal

 

injury, in some circumstances even fatal

  Failure to comply with this warning implies the risk of damage, 

 

in some circumstances even serious, to property, plants or animals

 

 

Do not perform operations that involve the opening of  

 the 

appliance

 

Electrocution caused by contact with live wires. Personal injury  

 

caused by burns and cuts, due to the contact with hot pipes  

 

and sharp surfaces

 

Do not perform operations that involve removing the  

 

device from its housing.

 

Damage to the device. Flooding caused by water leaking from  

 damaged 

piping.

 

Do not cut or modify the electrical connections of the  

 appliance

 

Electrocution caused by contact with live wires.

 

Do not put objects upon the units.

  LPersonal injury caused by objects falling from heights. 
  Damage to the device.

 

Do not climb onto the units.

  Personal injury caused by falling of the device. 
  Damage to the device or to the objects surrounding it.

 

Do not climb onto chairs, stools, ladders or unstable  

 

supports to clean the device.

  Personal injury caused by falling from heights or shearing  

 

(stepladders shutting accidentally).

 

Do not perform cleaning operations without switching  

 

off the device.

  Electrocution caused by contact with live wires.

 

Do not use insecticides, solvents or aggressive   

 

detergents to clean the device.

  Damage to plastic or painted parts.

 

Do not use the device for any purpose other than  

 

normal  household operation.

  Damage to the device caused by operation overload.

  Damage to objects caused by improper use.

 

Do not allow children or inexperienced persons to  

 

operate the device.

  Damage to the device caused by improper use.

If you detect a smell of burning or smoke, keep clear of  
the appliance, disconnect it from the electricity supply,  
open all windows and contact the technician.

  Personal injury caused by burns, smoke inhalation, asphyxiation.

Summary of Contents for ARIANEXT





































Reviews: