background image

1

GENERAL INSTRUCTIONS AND SAFETY NOTES

Thank you for purchasing your new CHAD-O-CHEF Gas Fireplace  manufactured 
to high standards and tested for compliance with SANS 1539:2017

The manufacturer and /or its agents and distributors will not be held 
responsible for injuries or damages caused by faulty or incorrect installation or 
use of the appliance.

1.  This fireplace provides radiant and convection heat both efficiently and 

safely, using the latest technology, without the need of a flue. 

This appliance 

consumes oxygen when in use and it is important that it is only used in a 

well ventilated area, for the efficient performance of the appliance and for 

the safety of the occupants of the area.

 

2.  No permanent ventilation is required if the room is 97m³ or larger, but an 

opening window is required. Should the room size be smaller than 97m³  
then permanent ventilation will be required. This volume may include up to 
50% of adjacent rooms connected by permanent archways, but not rooms 
separated by a closable door.

3. 

DO NOT

 install in a bathroom.

4. 

DO NOT

 install in a bedroom.

5.  Where applicable, the min. free area of ventilation must be 13 cm² per mJ of 

heat input. The heat input of other gas, wood, coal or paraffin appliances must 
be included in the calculations. It is the installer’s responsibility to do these 
calculations on behalf of the home owner. 

6. This appliance may only be installed by a registered NATURAL Gas installer 

and must comply with the installation requirements of SANS 10087-1.

  Ask 

to be shown the installer’s card with his registration number, before allowing 
the installation work to commence and make a note of his QCC number. 
Upon completion of the installation, the installer is required to explain the 
operational details of the appliance together with the safety instructions. You 
will be asked to sign acceptance of the installation and be provided with a 
completion certificate. You should only sign for acceptance of installation, 
upon commitment from the installer, that it complies with SANS 10087-1 and 
is to your satisfaction.  

Note that if the guarantee card is not signed by yourself and the installer 
and returned to the manufacturer, the product guarantee is invalid.

7.  On initial light-up of your new fireplace, the “newness” will burn off within the 

first few hours of operation. During this period some smoke may be emitted 
from the unit, this should be no cause for concern. Accordingly, the room 
should be well ventilated with all windows open during this period.

8. Humidity levels will rise with the use of your fireplace, but with the usual 

dryness of winter, it will surely be welcomed. Should the humidity become 
overbearing, open the windows for a short period to ventilate the room.

Summary of Contents for VFP 800-N













Reviews: