background image

3

INSTALLATION INSTRUCTIONS

FOR QUALIFIED GAS INSTALLER

Unpacking 
 

Carefully undo strapping to separate loose parts and remove all plastic  

 

protective sheeting.

Positioning and Sizing   
   

Confirm that the size of Fireplace chosen is the right size for the room. 

Connect up according to SANS 10087-1  
 

Connect a copper pipe from the gas supply via a regulator, complying with  

 

SANS 1237, to the Ø8 compression fitting on the control valve, taking into 

 

account the distance from the gas supply, to calculate the size of the copper  

 pipe.

Setting up 

1.  Insert the burner with the venturi facing the gas jet, and ensure the burner is 

seated correctly.

2.  Fill the burner with the special 

black

 radiant ceramic ash or glass chips.

3.  Spread the decorative stone or ceramic evenly around the burner. 
4.  Place the coals or pebbles in a single layer, double row, spread across the 

burner, allowing about 10mm gaps between them.     

5. 

Use only the number of pebbles or coals supplied

Testing and Commissioning 
 

Turn on the gas supply and test for leaks with soapy water. 

 

Ensure that the 

WORKING PRESSURE is 2,8 kPa at the control valve

 

See checklist. 

 

Briefing the customer

 

 

All instructions must be handed over to the user for safekeeping. Instruct the 

 

customer how to turn the gas on and off and how to light and control the fire.

 

After commissioning the unit the customer should be instructed on the safe  

 

use of it and the need for regular servicing. Frequency of service depends on  

 

usage, but must be carried out at the first sign of  malfunction and at least  

 

once in 2 years.

Summary of Contents for VFG 600













Reviews: