5
EN
Notice : When the outdoor unit is mounted on the thicker wall where effects the signal,
please extend the build-in Antenna of outdoor unit with Extend antenna.
Match code
1. Under the monitor status, Press button about 3 seconds then will pop up interface
2. Press the call button to switch on the outdoor-camera.
3. Press the call button about 3 seconds of the outdoor-camera.
4. If register is successful, the interface will be shown icon.
5. If register fail, the interface will be showed icon, then need to re-register.
Screen Icon
Monitor status
indicator
Volume indicator
Signal indicator
Indoor-monitor
battery indicator
Intercom status
indicator
Outdoor-camera
battery indicator
Call status indicator
1. Photograph:
1. When a visitor presses the call button of outdoor-camera ,it will take a photo.
2. Under the monitor status or intercom status, press the button, it will take a photo.
2. View photo:
Under the monitor status, press the or button, you can view the photo,
1. Press the button to enter delete dialog box. Press the button to confirm.
2. press the button to exit
3. Setting the bell tone:
Under the monitor status, press the or button to select bell tone.
4. Adjust the ring volume:
Under the intercom status, press the or button to adjust volume.
5. Adjust the brightness:
Under the intercom status, press the or button to adjust brightness.
6. Date / Time setting:
1. Under the monitor status, press the button about 3 seconds to enter time setting.
2. Press the or button to select item,
