TO INSTALL THE HANDLE
See Figure 9.
•
Hold the nylon nut securely and turn the screw counterclockwise to remove the nut
completely.
NOTE:
Do not remove the screw from the handle.
•
Place the nylon nut into the recessed hole on the back of the height/bevel adjusting
handwheel and hold in place.
•
Slide the handle, screw, and washer into the hole on the height/bevel adjusting
handwheel.
•
Using a athead screwdriver, turn the screw clockwise and tighten in place.
TO REMOVE/REPLACE THE
TABLE INSERT
See Figure 10.
•
Lower the blade by turning
the height/bevel adjusting
handwheel counterclockwise.
•
Remove the table insert.
ASSEMBLY AND ADJUSTMENTS
HEIGHT/BEVEL
ADJUSTING HANDWHEEL
Fig. 9
SCREW
NYLON
NUT
WASHER
HANDLE
TABLE
INSERT
Fig. 10
13
Summary of Contents for NORSE 9683412
Page 30: ...12 30 PARTS ILLUSTRATION...
