USER MANUAL
STEP 2)
Carefully connect the CGO2-GB’s power/control connector to the power/-
control port of the CGO SteadyGrip™ and then insert a microSD card into the
corresponding slot on the bottom of the CGO2-GB. You can use the included 8GB
card (from your RTF package) or any Class 10 microSD card up to 128GB.
TAKING PHOTOS AND RECORDING VIDEO
CGO2 APP seamlessly integrates camera controls and user settings of the
CGO2-GB so you can easily take still photos and start/stop video recording using
the corresponding buttons touch screen buttons found on the app.
1)
To take a still photo press the White
Still Photo Capture button to capture .
You’ll hear an audible ‘shutter’ sound
from the APP and the LED indicator on
the front of the CGO2-GB will change
from glowing solid green to glowing
solid blue. It will take approximately 5
seconds to capture the photo and
before you can take another still photo.
STEP 3)
Powering on and initialization. Place your
CGO SteadyGrip™ on a flat and stable surface, then
switch on the SteadyGrip™ and it will initialize after
4-8 seconds of no movement or vibration.
SteadyGrip™ Main LED Status:
Upon Powering On: Green LED Blinking for 8 seconds
(Starting up, Initialization) and Then Solid Green for
READY TO USE!
Low Voltage Warning: Green LED Blinking Slowly
Voltage Dropping: Green Blinking LED Speeds Up As
The Voltage Drops
CGO2-GB Error: Red LED Blinking
ATTACHING A MOBILE DEVICE TO THE STEADYGRIP™
The SteadyGrip's ergonomic design is capable of holding up to a 6.4 inch mobile
device.
Step 1)
Press the Curved Lip at the top
front of the SteadyGrip™ as illustrated
and fit your Mobile Device with the
screen facing toward the Main LED
and Pitch Control Wheel.
Step 2)
Download the CGO2 APP on
the Apple APPSTORE or Android
APPS Marketplace.
Step 3)
Connect your Mobile Device
to the CGO2-GB’s WiFi by selecting
CGO2GB’s SSID and by entering the
WiFi Key / Password:1234567890.
The SteadyGrip™ features a camera pitch controller that allows precise camera
angle control on the go. Simply roll the pitch control wheel forward to move the
camera pitch/angle downward and
roll the pitch control wheel
backward to move the camera
pitch/angle upward. Please review
these instructions along with the
illustrations to familiarize yourself
on how to control the CGO2-GB
with your SteadyGrip™.
IMPORTANT NOTE:
You cannot take still photos while recording video. You MUST
stop recording video in order to take still photos.
2)
To start/stop recording video simply press the red button located on the APP.
You’ll hear an audible indication from the APP each time the recording starts/stops.
And while video is recording the LED indicator on the front of the CGO2-GB will
flash blue and green, and there will be an indicator showing time length of the
recording on the APP Screen.
IMPORTANT NOTE:
You can choose to record video at 48, 50 (PAL) or 60 (NTSC)
frames per second by tapping the corresponding button near the upper left-hand
corner on main screen of the APP.. Keep in mind that the delay in the live video
stream will be lowest at 48 and 50 as compared to 60 frames per second.
The pitch control wheel, (similar to a scroll wheel on a traditional computer mouse)
located on the top of the SteadyGrip™ allows you to set the pitch/tilt position of
the CGO2-GB from approximately straight ahead (when the pitch control wheel is
rolled backward toward the user to its maximum position) to approximately straight
down (when the pitch control wheel is rolled out away from you until its maximum
position). And you can easily set a position in between by adjusting the pitch
control wheel accordingly. According to Figure 9a on page 9.
QUICK TIP:
There’s an adjustable counterbalance located on the rear of the
CGO2-GB. This counterbalance has been adjusted at the factory to provide the
best balance and performance overall so typically it should NOT need to be
adjusted. However, if you find that the CGO2-GB is making any ‘buzzing’ sounds
while powered on, carefully twist the counterbalance in or out until the sound
stops in order to achieve the best balance, performance and photo/video quality.
Yuneec products and accessories are guaranteed against manufacturing defects for
six (6) months from the original date of purchase. Yuneec’s sole obligation in the
event of such defects during this period is to repair or replace the defective part or
product with a comparable part or product at Yuneec’s sole discretion. Except for
such repair or replacement, the sale, processing or other handling of this product is
without warranty, condition or other liability. Damage (including crash damage)
resulting from use, accident, or normal wear and tear is not covered by this or any
warranty. Yuneec assumes no liability for any accident, injury, death, loss, or other
claim related to or resulting from the use of this product. In no event shall Yuneec
be liable for incidental or consequential damages relating to or resulting from the
use of this product or any of its parts. Please review the instructions carefully when
using the products. Returns or replacements of parts and/or products may be
subject to shipping, handling, replacement and/or restocking fees.
IMPORTANT NOTE:
Drop or water damage is NOT covered under warranty.
WARRANTY INFORMATION
CUSTOMER SERVICE
YUNEEC EU
24568 Kaltenkirchen, Germany
+49 4191 932620
YUNEEC AU
53 Ellemsea Circuit, Lonsdale
South Australia 5160
+61 (0) 8 8186 3301
YUNEEC USA
5555 Ontario Mills Parkway,
Ontario, CA91764, USA
1 855 2848888
YUNEEC HK
2/F, Man Shung Industrial Building,
7 Lai Yip Street, Kwun Tong,
Kowloon, Hong Kong
852 3616 6071
http://yuneec.com/support
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WWW.YUNEEC.COM
USING THE CAMERA PITCH CONTROL WHEEL
Summary of Contents for SteadyGrip
Page 1: ......