background image

11

Inspire Electric Fireplace

10009472

BASIC WARRANTY:

CFM Corporation (hereinafter referred to collectively as 
the “Company”) warrants that your new electric fireplace 
is free from manufacturing and material defects for a 
period of one year from date of installation, subject to the 
following conditions and limitations.

1.  This electric fireplace must be installed and operated at all 

times in accordance with the Installation and Operating in-
structions furnished with the product. Any alteration, willful 
abuse, accident, or misuse of the product shall nullify this 
warranty.

2.  This warranty is non-transferrable, and is made to the 

original owner, provided that the purchase was made 
through an authorized supplier of the Company.

3.  This warranty is limited to the repair or replacement of 

part(s) found to be defective in material or workmanship, 
provided that such part(s) have been subjected to normal 
conditions of use and service, after said defect is con-
firmed by the Company’s inspection.

4. 

This warranty does not cover the lightbulb(s) included 
with the fireplace.

5.  The Company may, at its discretion, fully discharge all 

obligations with respect to this warranty by refunding the 
wholesale price of the defective part(s).

6.  Any installation, labor, construction, transportation, or 

other related costs/expenses arising from defective part(s), 
repair, replacement, or otherwise of same, will not be 
covered by this warranty, nor shall the Company assume 
responsibility for same.  Further, the Company will not be 
responsible for any incidental, indirect, or consequential 
damages, except as provided by law.

1 YEAR WARRANTY

For Vermont Castings Electric Fireplace

7.  All other warranties - expressed or implied - with respect 

to the product, its components and accessories, or any ob-
ligations/liabilities on the part of the Company are hereby 
expressly excluded.

8.  The Company neither assumes, nor authorizes any third 

party to assume, on its behalf, any other liabilities with 
respect to the sale of this Vermont Castings product.

9.  The warranties as outlined within this document do not ap-

ply to non-CFM Corporation accessories used in conjunc-
tion with the installation of this product.

This warranty is void if:

a)  The fireplace has been operated in atmospheres 

contaminated by chlorine, fluorine or other damaging 
chemicals.

b)  The fireplace is subjected to prolonged periods of 

dampness or condensation.

c)  Any alteration, willful abuse, accident, or misuse of the 

product. 

IF WARRANTY SERVICE IS NEEDED . . .

1)  Contact your supplier.  Make sure you have your warranty, 

your sales receipt, and the model/serial number of your 
CFM Corporation product.

2) 

DO NOT ATTEMPT TO DO ANY SERVICE WORK YOUR-
SELF.

Summary of Contents for Inspire ICVCEFP01













Reviews: