What to do if nothing has worked out
If after having compleated demagnetization process followed by compass calibration procedure
your multicopter still hasn’t got rid of magnetized compass symptoms, do contact special service
centre. In rear cases given symptoms may be caused by some other multicopter malfunctions
(technical microchip malfunction of a compass, cable malfunction, multicopter software issues,
incorrect IMU calibration or malfunction).
Warranty
Factory warranty for CFixer is 12 months from the date of purchase.
During the warranty period factory provides repair of possible CFixer defects caused by the factory
without any additional payment from the purchaser (free of change).
In case of malfunction, it is necessary to contact the particular seller your CFixer was purchased
from.
Technical specifications
Housing: plastic;
Voltage supply: 12 to 26 volts D.C.
Consumption current: no more than 3A.
Dimensions: 55 x 98 x 17 mm;
Weight without a wire: 160 g;
Operating temperature range: from -20 to +40 °C
It is recommended to perform compass calibration in a field or a forest
CFixer can be used the same way wheather multicopter is turned ON or OFF, it has no influence
on demagnetization process of the compass.
After having demagnetized multicopter’s compass and having performed it’s calibration, it is not
necessary to repeat calibration again after using CFixer. Multicopter memorizes the «clear»
calibration state so that for the next time you can just perform demagnetization without doing a
calibration afterwards; which significantly reduces time spent returning the compass to the
factory state.
PERFORM A COMPASS CALIBRATION ACCORDINGLY TO YOUR MULTICOPTER USERS MANUAL
2017 CFixer Team
WhatsApp / Viber
+1 (307) 264-0934
www.cfixer.com
RUSSIAN FEDERATION
