Before you put the device into operation please take enough time and read the instructions
for use carefully. Keep these instructions for use for further reference.
Scope of delivery:
1 Soldering station
1 Soldering iron with connecting cable
1 Instruction for use
1 Soldering tip 1,2 mm pencil formed
1 Safety holder for the soldering iron
1 Angle-shaped holder
1 Fixing screw
Please check the contents of the package for its completeness.
Safety regulations:
- Before putting the device into operation, please check if your electrical source is laid out for
a voltage of 230 V.
- Take the soldering station out of the box before first operation. Dispose of unneeded
packaging accordingly.
-
ATTENTION
! If you do not use the Soldering station the soldering iron (2) must be placed
in the safety holder (1).
- Use the device
solely
on a stable and even surface.
- This device is not determined for persons (including children) with restricted physical, sensory
and mental ability or those who do not have experience or have not sufficient knowledge,
unless they are supervised by a competent person or they were given instructions how to
use the device.
- Children must be under supervision to make sure that they do not play with the device.
- If the connecting mains cable and/or the cable of the soldering iron is damaged, it must be
replaced by the manufacturer, customer service or a similar qualified person to avoid damage.
- Do not carry out any manipulations on the device on your own authority.
- If you do not handle the device carefully a fire could start.
- Do not use the Soldering station close to flammable materials.
- Before use remove all flammable objects, liquids and gases from the working area of the
device. Keep your working area clean to prevent accidents.
- Before use check if the tip is properly adjusted on the device. The hot tip or the slot for the
tip must not get in contact with skin, hair, etc.
Risk of burns!
- Make sure that the connecting cable does not come in contact with heat, oil or sharp edges.
Damaged connecting cables can cause fire, short circuits and electric shock.
- Never touch the device, the plug or the connecting cables with damp hands.
- Never immerse the device, soldering iron as well as the connecting cables into water!
- After use the Soldering station must be switched off. Afterwards unplug the device, place
the soldering iron (2) into the safety holder (1) and let the device cool down completely
before you store it away.
- Do not leave the device unattended when in use.
- If the device is not used keep it on a secure place protected from dust and humidity.
- Before use check each time if the Soldering station, the soldering iron or the connecting
cables are not damaged. If damaged do not use it!
- During usage provide enough ventilation. Make sure that no toxic vapors or gases are inhaled.
Wear protective clothes.
- After longer interruptions of work disconnect the device from the electrical source.
- National and international provisions regarding security, health and labor protection must be
followed.
Use according to specifications:
The CFH Soldering station can be used solely in a dry interior. The CFH Soldering station is
suitable for a nominal voltage of 230 Volts and must be only connected to grounded sockets.
The CFH Soldering station is designed for a multiple use in electronics, in work-shops, repair
shops, for handymen, amateurs, as well as for model constructions. CFH Soldering station
can be used for soft soldering with tin solder and flux. It is also suitable for micro-soldering
works to heavy works on metal sheets.
Other use is not allowed as it can lead to injuries. In such cases the manufacturer is not liable.
