8
REDIAL
The 9602 series can automatically redial the last number
dialed. Off-hook, press the
REDIAL
key to redial the last
number.
USING THE HOLD KEY
The
HOLD
key places the call on hold locally at the cordless
telephone.
1. With a call active, press the
HOLD
key on either the
To remove a call from hold:
1. Press the line key of the call on hold. This will remove the
call from hold, making the call active again.
2. The red LED will return to steady illumination, indicating
the line is active.
To change phones after placing a call on hold:
1. Place the call on hold as above.
2. Pick up the call at another telephone that is on the same
line. The telephone will activate the line and remove the hold
at the original telephone.
TO MUTE THE SPEAKERPHONE
1. Press the
MUTE
key on the base unit. The red LED above
the
MUTE
key will illuminate. The party on the other end
will not be able to hear you when the
MUTE
LED is lit.
2. Press the
MUTE
key again to turn off the mute feature.
The
MUTE
LED will go out.
ADJUSTING HANDSET RECEIVE VOLUME
The handset has five(5) volume levels. To adjust the handset
volume, locate the volume up/down keys, located on the
handset, below the “
0
” key. Pressing the down
key will
decrease the volume level, while pressing the up
key
will increase it.
AUTO DIAL KEYS
The 9602 series has either five (5) or ten (10) programmable
guest service (auto dial) keys, depending on the model you own.
These keys can be programmed to automatically dial telephone
numbers, or to activate telephone system features. To program the
auto dial keys (programming can only be done from base unit):
1. With the phone “on hook” (inactive) and the faceplate
removed, press the recessed
STORE
key (see diagram).
2. Enter the desired telephone number (up to 15 digits in
length) to be stored. To enter a “pause” in the number
string, press the
REDIAL
key as necessary.
3. Press the
STORE
key again.
4. Press the auto dial key where the number is to be stored.
Programming is now completed for that auto dial key.
To program additional keys, repeat this process.
CONFERENCE
The “
CONF”
key allows for three-way conversations. Depending
on the situation, you may initiate a conference call using one of
these methods:
User initiates two calls:
1. Place call to first party, then place them on hold by
pressing the
HOLD
key.
2. Using the second line, place call to second party.then
place them on hold by pressing the
HOLD
key.
3. Activate the 3-way conference call by pressing
HOLD/CONF
key on the handset.
User initiates one call:
1. After receiving a call from first party, place them on hold
