1. Voice Support with PAS Speakers Only.
Insert the PAS signal plug directly into the line output
jack of the CVS receiver for a voice only presentation.
(See Figure 1, page 6)
2. Simultaneous Single Voice and Multimedia Support Using
a Notebook Computer SoundBlaster Sound Card/Mixer.
Insert the PAS signal plug directly into a line out or
headphone jack on a notebook computer and the CVS line out
into the computer line input jack for a simultaneous voice and
multimedia sound presentation.
(See Figure 2, page 7)
3. Simultaneous Dual Voice and Multimedia Support Using
a Notebook Computer SoundBlaster Compatible Card. (Also
applies to an electronic mixer)
Insert the PAS signal plug directly into a line out or
headphone jack on a notebook computer and two CVS receivers
into the notebook. One CVS receiver will connect between the
microphone output jack of the receiver to the microphone input
jack of the notebook and the other will connect between the line
output jack of the receiver to the line input jack of the notebook
with the supplied coiled patch cables.
(See Figure 3, page 8)
Page 5
Introduction
In lieu of a second “voice”, the second CVS system can
transmit audio content from an external sound source like a VCR,
VCD, DVD, or tape deck. (You may need one or more optional
accessories listed on the last page of this manual.)
4. Multiple Wireless Speaker Option, Using Multiple Receivers:
This option allows you to place several wireless PAS
speakers throughout a room. For large or problem rooms multiple
PAS systems are helpful to get a more even sound coverage and to
increase loudness. You will use
one
transmitter to broadcast to all
receivers. There is no limit to the number of receivers, or PAS units,
that can be run from
one
transmitter. (See Figure 4, page 9)
Welcome to the Clear Voice System.
The CVS allows the presenter(s) to do four things:
Summary of Contents for CVS-II
Page 1: ......