Speaker Location
The Astronaut is very forgiving and does not
need to be in the center of the room for the
best sound quality. Typically, installers choose
a location near a power outlet in the ceiling.
CAUTION
Install the Astronaut speaker
away from direct heat, high humidity, and
physical obstructions. Do not install the Astronaut
speaker near a projector exhaust port or fan.
1.
Mount the Astronaut speaker to the ceiling bracket
D
. Use a
finger to locate the first peg
E
. Align this peg with one of the
four holes
F
on the speaker base. All other pegs will fall into
place accordingly. Speaker will be flush to the ceiling.
2.
Twist the speaker slightly to the right until you hear it lock.
Once locked, the ceiling bracket pointer
G
will line up with
the line-guide on the speaker lens.
3.
Once the speaker is attached to the ceiling
bracket, screw the eyebolt
H
through the
top of the ceiling plate
I
and into the
Astronaut base.
CAUTION
Do not connect speaker to power until ceiling installation is completed and at least one source cable is connected.
MOUNT THE
ASTRONAUT SPEAKER
E
H
D
I
G
F
CONNECT POWER &
AUDIO SOURCES
Volume Control
When using a variable output source like
a projector, control the volume level at the
source. When using a fixed audio output,
adjust the volume with an in-line volume
control or mixer (sold separately).
FIRST— CONNECT A/V EQUIPMENT
The Astronaut has a built-in 3-channel mixer that accepts up to
3 simultaneous devices (A, B, C).
Common Sources
Source Cable
(Stereo/Mono
3.5 mm)
Power Supply
J
Projector
CD / iPod
®
/ iPad
®
Microphone
Interactive Whiteboard
DVD / VHS
Computer
K
R E MO V
E
SECOND— CONNECT POWER
Connect the power supply, low-power barrel connector
J
into
the speaker. Plugging / unplugging this connector will turn the
speaker on and off.