background image

*CET is a trademark of CET F

ire Pumps Mfg Ltd

.

75 Hector St., P.O. Box 90, Pierreville (Québec) Canada  J0G 1J0      Telephone: 1-800-567-2719      Fax: 1-800-434-2613      

www.fire-pump.com

ACCEPT ONLY THE BEST

A   C E N T U R Y   O F   E N G I N E E R I N G   F O R   T H E   B R AV E S T

SM-PFP-21hpDSL-MR

INSTRUCTIONS MANUAL

Congratulation, you have just purchased a C.E.T. portable pump. If you follow the procedures in this 
operation manual, it will give you years of use without any problems.

ENGINE SPECIFICATIONS

• D722 Kubota liquid cooled engine
• 3-cylinder, 4-stroke diesel engine
• 12V Electric start.
• Alternator capacity: 12V-12.5A (150W)

PUMP UNIT SPECIFICATIONS

• C.E.T. single stage centrifugal pump.
• Pump body made from resistant aluminum alloy.
• Bronze impellers.
• Steel pump shaft.
• Mechanical shaft seal.
• Stainless steel pump shaft.
• Exhaust priming system, guaranteed up to 15’ (4.6 meter) lift.
• One 1 1/2” (38 mm) delivery outlet.
• One 2 1/2 ” (65 mm) suction inlet.
• Dimensions : Length 31 1/2’’ (800 mm); Width : 26’’ (660 mm); Height : 31 1/2’’ (800 mm).
• Weight : 282 lbs (128 kg).
• Two-years warranty.

CONTROL PANEL

• Engine ignition switch
• Throttle control vernier
• Operating panel light
• Pilot lights
• Inlet and outlet pressure gauges
• Priming valve
• Engine stop knob

INCLUDED ACCESSORIES

• Quick connect for 12-V battery

PERFORMANCE

MAX FLOW: 300 GPM (1136 LPM)
MAX PRESSURE: 190 PSI (13.1 BAR)
250 GPM (947 LPM) @ 50 PSI (3.5 BAR)
160 GPM (606 LPM) @ 100 PSI (6.9 BAR)
90 GPM (340 LPM) @ 150 PSI (10.3 BAR)

Your pump comes with a full year warranty on all mechanical components.

Summary of Contents for SM-PFP-21hpDSL-MR

Page 1: ... single stage centrifugal pump Pump body made from resistant aluminum alloy Bronze impellers Steel pump shaft Mechanical shaft seal Stainless steel pump shaft Exhaust priming system guaranteed up to 15 4 6 meter lift One 1 1 2 38 mm delivery outlet One 2 1 2 65 mm suction inlet Dimensions Length 31 1 2 800 mm Width 26 660 mm Height 31 1 2 800 mm Weight 282 lbs 128 kg Two years warranty CONTROL PAN...

Page 2: ...d Use your pump with less than 12 in of water below the inlet of the suction hose Allow your pump to run without surveillance Run the pump with the discharge valve closed for more than 1 minute STARTING PROCEDURE Place your pump on a hard stable surface within 15 from horizontal Check the oil Check the fuel tank level Connect your suction hose Make sure that there is a rubber seal on the adapter a...

Page 3: ...rnals and replace hose connection caps Taking care of the pump will help prevent the pump from seizing up TROUBLESHOOTING Before calling us try the following if your pump does not operate properly If the venturi does not work properly Check the casing drain valve it should be closed Check any air leakage from suction hose If the engine seems to speed up and down lost of suction Make sure the sucti...

Page 4: ...therwise for parts accessories or components not manufactured by it but purchased for assembly into the equipment but CET will assign to the Purchaser whatever warranty rights are extended by the supplier of such part accessory or component 2 CET incurs no liability under this warranty or otherwise for equipment which has been abused altered or improperly maintained or for equipment which has been...

Reviews: