Revision Date: February 01, 2018
Mounting the Meter
Remove the mounting brackets from the meter.
Fit the meter through a 186mmx186mm cutout as shown in the Figure below
Re-install and tighten the mounting brackets against the panel to secure the
meter
Chassis Ground Wiring
Connect one end of the ground wire to the Chassis Ground terminal on
the PMC-680i using a spade connector
Connect the other end of the ground wire to an Earth ground
Wiring Diagrams with CTs
4-wire Wye, no PTs, 4CTs
4-wire Wye, 3PTs, 4CTs
3-Wire Grounded Wye, no PTs, 3CTs
3-Wire Grounded Wye, 3PTs, 3CTs
3-Wire Delta, no PTs, 3CTs
3-Wire Delta, 2PTs, 3CTs
3-Wire Delta, 2PTs, 2CTs