CET PMC-230, User Manual, Page: 30 / 37

CET Electric Technology
23
+8 RW Period #5 Start Time UINT16 See Period #2 Start Time
+9 RW Period #5 Tariff UINT16 0=T1, …, 3=T4
+10 RW Period #6 Start Time UINT16 See Period #2 Start Time
+11 RW Period #6 Tariff UINT16 0=T1, …, 3=T4
+12 RW Period #7 Start Time UINT16 See Period #2 Start Time
+13 RW Period #7 Tariff UINT16 0=T1, …, 3=T4
+14 RW Period #8 Start Time UINT16 See Period #2 Start Time
+15 RW Period #8 Tariff UINT16 0=T1, …, 3=T4
Table 5-24 Daily Profile Data Format
Notes:
1) Daily Profile #1’s Period #1 Start Time is always 00:00 and cannot be modified.
2) Setting a Period’s Start Time as 0xFFFF terminates the Daily Profile’s settings. All later Daily Profile’ setup parameters will be ignored ,
and the previous Period’s duration is from its Start Time to the end of the day.
3) The minimum interval of a period is 15 minutes.
4) The Start Time of a particular Period must be later than the previous Period’s.
5.8.4 Alternate Days
Each Alternate Day is assigned a Daily Profile and has a higher priority than Season. If a particular date is set as
an Alternate Day, its assigned Daily Profile will override the “normal” Daily Profile for this day according to the
TOU settings.
The PMC-230 has two sets of Alternate Days setup parameters, one for each TOU. The Base Addresses for the
two sets are 7700 and 8700, respectively, where the Register Address = Base A Offset. For example, the
register address for TOU #2’s Alternative Day #2’s Date is 8700+3 = 8703.
Offset Property Description Format Note
0 RW Alternate Day #1 Date¹ UINT32 See Table 5-26
2 RW Alternate Day #1 Daily Profile UINT16 0 to 11
3 RW Alternate Day #2 Date¹ UINT32 See Table 5-26
5 RW Alternate Day #2 Daily Profile UINT16 0 to 11
6 RW Alternate Day #3 Date¹ UINT32 See Table 5-26
8 RW Alternate Day #3 Daily Profile UINT16 0 to 11
9 RW Alternate Day #4 Date¹ UINT32 See Table 5-26
11 RW Alternate Day #4 Daily Profile UINT16 0 to 11
12 RW Alternate Day #5 Date¹ UINT32 See Table 5-26
14 RW Alternate Day #5 Daily Profile UINT16 0 to 11
15 RW Alternate Day #6 Date¹ UINT32 See Table 5-26
17 RW Alternate Day #6 Daily Profile UINT16 0 to 11
18 RW Alternate Day #7 Date¹ UINT32 See Table 5-26
20 RW Alternate Day #7 Daily Profile UINT16 0 to 11
21 RW Alternate Day #8 Date¹ UINT32 See Table 5-26
23 RW Alternate Day #8 Daily Profile UINT16 0 to 11
24 RW Alternate Day #9 Date¹ UINT32 See Table 5-26
26 RW Alternate Day #9 Daily Profile UINT16 0 to 11
27 RW Alternate Day #10 Date¹ UINT32 See Table 5-26
29 RW Alternate Day #10 Daily Profile UINT16 0 to 11
… RW … UINT32 …
… RW … UINT16 …
87 RW Alternate Day #30 Date UINT32
89 RW Alternate Day #30 Daily Profile UINT16 0 to 11
Table 5-25 TOU – Alternate Days
Notes:
1) The following table illustrates the data structure for the Date register:
Byte 3 Byte 2 Byte 1 Byte 0
Reserved Year-2000 (0-37) Month (1-12) Day (1-31)
Table 5-26 Date Format
When the Year and/or Month are set as 0xFF , it means the Alternate Day is repetitive by year and/or month, i.e. the same day of every
year or every month is an Alternate Day.
5.9 Data Recorder Setup
Register Property Description Format Range, Default*
6600 RW Trigger Mode
1
UINT16 0=Disabled, 1=Triggered by Timer*
6601 RW Recording Mode
1
UINT16 0=Stop-when-Full, 1=First-In-First-Out*
6602 RW Recording Depth
1, 3
UINT16 0 to 65,535, 60000*