Using the DTW
OMEGA FLEX Desktop Writer DTW
Page 14 of 26
6.1
Hardware driver support
Your optional hardware may require drivers for its perfect
operation.
These drivers should be installed automatically, yet in some
cases, a manual installation may be necessary.
The required drivers are copied into your OMEGA program
folder on your hard disk. Depending on your operating system,
you will find them under the following paths:
C:\Programme\Omega\Driver\Mifare or FLEX\
C:\Programme(x86)\Omega\Driver\Mifare or FLEX\
These folders include the drivers for the DTW.
To trigger the driver installation, start your standard
hardware recognition of your operating system.
When you are asked to enter the memory location of the
respective driver, enter the folder of the path indicated
above.
The following describes the hardware installation under a
Windows 7™
operating system.
To install the supplied drivers for the hardware, proceed as
follows:
1
Open your Windows
control panel, and select
Devices and Printers
.
