CES M-20 Repeater Maker plus Installation And Operation Manual Download Page 3

CES SUPPORT 407-679-9440               

Page  3

MAN79 ©  CES 2009

Warranty

CES Wireless Technologies Corp. warrants this product to be free from defects in material and workmanship for 
three years from date of shipment. If such malfunction occurs, it will be repaired or replaced (at our option) without 
charge for materials or labor if returned to the factory. This warranty does not apply to parts damaged due to 
improper use- including accident, neglect, unreasonable use, and improper installation - or to unauthorized 
alterations or modifications of the equipment. It does not extend to damage incurred by natural causes such as 
lightening, fire, floods, or other such catastrophes, nor to damage caused by environmental extremes, such as power 
surges and or transients. It does not extend to microprocessors if is determined that the failure of a micro is due to 
static damage, application of improper voltages to the unit, or other problems nor related to circuit design. In such 
case or in the case of a desire to update the micro to a different version of software, such request must be specified 
in writing, and there will be a charge agreed upon by both parties.

This product is warranted to meet published specification and to operate as specified only when properly installed in 

radio equipment which complies with US FCC specification and the applicable radio manufacturer’s specifications. 
CES is not responsible for any operational problems caused by system design, outside interference, or improper 
installation. Installation and programming of this CES product must be completed by a qualified two-way radio 
technician or engineer.

Equipment for repair may be returned to the factory, freight prepaid, only with prior authorization. Please call 407-
679-9440 for an RMA number. A brief letter describing the nature of the defect should be included with the 
merchandise. Repair by other than CES will void this guarantee. In-warranty merchandise must be shipped, freight 
prepaid, to CES. CES will return the repaired or replaced equipment to purchaser, within the United States. 

This warranty applies to the original purchaser of the equipment only. CES is not liable under this warranty, or any 
implied warranty, for loss of use or for other consequential loss or damage experienced by the purchaser. Some 
states do not permit the exclusion or limitation of implied warranties or consequential damages. This warranty 
provides special legal rights, and the purchaser may have other rights that vary from state to state.

Copyright

The information in this manual, and any software in this product remains the property of CES. Reproduction, 
duplication, or disclosure is not permitted without the prior written consent of CES. CES reserves the right to 
change products, specifications, and installations data at any time, without notice.          

All information contained in this document is carefully prepared and offered in good faith as a guide in the 
installation, operation, use and servicing of our products. Installers must insure that the final installation operates 
satisfactory, within relevant regulatory requirements. We accept no responsibility for incorrect installation.

A CES PUBLICATION Copyright CES 1974-2010

Introduction

Summary of Contents for M-20 Repeater Maker plus























Reviews: