Warrior MCB-9XL Transmitters
U106.3.0
10
4.0
Warrior MCB-9XL Operation
4.1
MCB-9XL System Startup
Figure 3. MCB-9XL Turn ON/OFF
For the following procedure, assume that power is applied to the Warrior receiver. Stand close to
the MU receiver when starting up the MCB.
1. Confirm that the
STOP
switch is pressed down (
OFF
).
2. Turn on the MCB by pressing and releasing the green
Horn/Start
pushbutton
(
S09
). The
RF/A Selection
and
Bat/B Selection
LEDs should begin cycling.
3.
Within one second
, pull up the
STOP
switch
.
4. Wait until the LEDs cycle and then the
RF
LED begins flashing.
5. Press the green
Horn/Start
pushbutton (
S09
). The MU receiver relay sounds the
attached horn (or lights the light), and the Main Line Contactor (MLC) relays
energize in the receiver.
The MCB-9XL is ready for crane operation.
Step 1
Step 2
Step 3
Step 5
Step 4
Push
Down
Pull
UP
