SmaRT DIN-9H1R5
U082.0.2 DIN-9H1R5
6
3.0
SmaRT Handheld Remote to DIN-9H1R5
Communications
The DIN-9H1R5 communications link to the system SmaRT remote is established at the factory
before a system is shipped. There may be times when it is necessary to establish, re-establish,
or break the link in the field. The process used to establish the link is Associate, while the
process used to break the link is called Dissociate. Appendix C of this manual describes
common Associate and Dissociate procedures for a variety of SmaRT remote control units.
To Associate or Dissociate the DIN-9HR5 to or from a
standard
SmaRT remote control unit,
refer to Appendix C.
✓
Note: Custom engineered systems may have a unique way of establishing the
communications link between the system remote control unit and the base unit. If you have a
customized system and need to Associate or Dissociate, refer to the custom Engineered
System Manual or Engineered Application Specific Supplement document provided with the
custom system when shipped.
4.0
SmaRT DIN-9H1R5 Variations
Table 1. SmaRT DIN-9H1R5 Variations
Model
Freq.
RF
Power
Input
Power
Output
Type
Serial
Port
SmaRT
Connect
Antenna
Type
AC
Suppression
DIN-9H1R5-INT-LVD
900 MHz
10 mW
7
–32 VDC
1 Form C,
5 Form A
RS-232
Yes
Internal
No
DIN-9H1R5-EXT-LVD
900 MHz
10 mW
7
–32 VDC
1 Form C,
5 Form A
RS-232
Yes
External
No
5.0
DIN-9H1R5 Antenna and Cable
Table 2. Compatible DIN-9H1R5 External Antenna Details
Part
Cervis #
900 MHz IS BAND Swivel Antenna
BB3-06
3-ft. antenna extension/adapter cable RP-SMA Plug to RP-TNC Jack
AA7-07
✓
Note: Use only the antenna recommended by Cervis, Inc. with the SmaRT base unit.
