SmaRT BU-xH8D Base Unit Family
U088.4.4-SmaRT_BU-xH8D
18
Figure 10. MCB Switch Actuation for Associate and Dissociate
To Dissociate (see Figure 10)
The MCB remote must be OFF and the base unit must have power removed before beginning the
Dissociation process.
Note: The Machine Stop button must be in the UP position before activating and using the
mini console box remote.
1. Stand near the base unit with the remote
OFF
and
power removed
from the
base unit (disconnect P1 and P2 or turn the source power OFF).
2. Release the
STOP
button on the MCB handheld by pulling it up.
3. Push and hold switch
S1 DOWN
; then, press the
Power ON
button. All four
LEDs light solid.
4. Observe the LEDs. When the TX LED begins to blink, power up the base unit
while continuing to hold S1 and the Power button. When all four LEDs light solid,
release S1 and the pushbutton.
Note: Be aware that all remote associations to the base unit are now broken.
Power ON
S1
Pull
UP
S1
Pull
UP
ASSOCIATE
DISSOCIATE
