Quartz PRECIDRIVE MOON PHASE
WWW.CERTINA.COM
WWW.CERTINA.COM
364_EN / 06.18
364_EN / 06.18
2/3
3/3
Congratulations!
We congratulate you on choosing a watch from CERTINA
®
, a Swiss brand among the most highly renowned in the world. Meticulously designed, using only
the highest quality materials and components, it is protected against impacts, temperature variations, water, dust, and also features the
DS
concept.
This user manual applies to CERTINA
®
quartz watches equipped with the PRECIDRIVE F05.441 movement. For information on setting and using your
PRECIDRIVE watch, please refer to the instructions below.
To ensure that your watch operates with perfect precision for many years to come, we advise you to pay careful attention to the advice given in this user
manual.
The
DS
(Double Security) concept is characterised by:
– extreme impact resistance,
– an ultra-resistant sapphire crystal,
– a gasket inside the crown and a gasket around the winding stem guaranteeing the water resistance of the watch even when the crown is pulled out,
– a reinforced case back.
Settings
Models with screw-in crown
To ensure even better water resistance, some models are fitted with a screw-in crown (
6
). Before setting the time or date, you must first unscrew the
crown (
6
) to position
IB
, before pulling it out to position
II
or
III
.
Important: After each operation, you must always screw the crown back in, to ensure that your watch remains water-resistant. You are
advised not to operate the crown (6) underwater.
Setting the time
•
Pull the crown (
6
) to position
III
and turn it forwards or backwards to display the desired time.
•
Push the crown (
6
) back into position
l
(and screw it back in if you have a screw-in crown model).
Setting the Moon phase display
•
Pull the crown (
6
) out to position
II
.
•
Turn the crown (
6
) backwards to set the Moon phase display.
•
Push the crown (
6
) back into position
l
(and screw it back in if you have a screw-in crown model).
Quick date correction
•
Pull the crown (
6
) out to position
Il
. The seconds hand (
3
) will continue running.
•
Turn the crown (
6
) forwards until you obtain the desired date.
•
Push the crown (
6
) back into position
l
(and screw it back in if you have a screw-in crown model).
Advice for synchronising your watch
To synchronise the seconds hand (
3
) with an official time signal (radio/TV/Internet), pull the crown (
6
) out to position
III
; the seconds hand (
3
) will stop. At the
tone, push the crown (
6
) back into the rest position
I
.
