General Safety Rules
1. The Aquaspeed pumps are specially designed for the pre-filtering and re-circulation of water in swimming pools
2. They are designed to work with clean water at a temperature not exceeding
40°C (104°F)
3. The installation should be carried out in accordance with local safety and electrical regulations
4. Original replacement parts and accessories authorized by the manufacturer ensure a high level of safety. The manufacturer of the
pump assumes no liability for the damage and injuries
caused by un-authorized replacement parts and accessories
5. During operation, some parts of the pump are subject to dangerous electric voltage. Work may only be performed on each pump
or on the equipment connected to it after
disconnecting them from the mains power, and after disconnecting the
starting device
6. The user should make sure that assembly and maintenance tasks are carried out by
qualified authorised persons
and that
these persons have first carefully read the instructions for service and installation
7. The operating safety of the pump is only guaranteed if the installation and service instructions are correctly followed
8. In the event of defective operation or fault, contact your supplier
9. If the supply cord is damaged, it must be replaced by an authorised service agent
10. This appliance is not intended for use by persons with a lack of experience and knowledge
11. The appliance is not intended for use by young children. Young children should be supervised to ensure that they do not play
with the appliance