model no. 054-8289-8
14
TROUBLESHOOTING
Problem
Possible Causes
Solution
The motor does not start.
The tool is not connetced to
a power source.
Connect the tool to a power
source.
Blade cannot be removed.
Saw dust in the blade
clamp.
Clean the clamp slot with
a brush.
Cutting is difficult.
Saw blade is worn.
Replace the saw blade.
TROUBLESHO
OTING
ADJUSTMENT
Setting the cutting height
As shown in Fig. 7.
CAUTION!
When the motor has been
switched off, the blade continues
running for several seconds therefore
do not touch the underside of the
mower until the blade has come to a
standstill!
If you want to change the cutting height,
place the adjusting lever (2) in the
desired position. (Fig. 7)
1. Push the handle to the outside of the
mower body.
2. Set the handle at the desired height.
Fig. 7
OPERATION
WARNING
The lawn mower is suitable for private use in the garden and private
lawn only. This machine is not intended for cutting grass in public
parks, playing fields or on farms or in forests.
Unauthorized users:
Persons who are not familiar with the operating manual, children, young people under the age of
16 as well as persons under the influence of alcohol, drugs or medication must not operate the
unit.
Working hours for electric lawn mower
Operators should always show due consideration to others living nearby. Please check with local
regulations for allowable operating times.
Switching on the unit
Do not switch on the unit until it has been completely assembled. Before switching on the unit,
always check the power cable for signs of damage; only a undamaged power cable may be used.
Note:
Damaged power cables are highly dangerous!
Power connection
1. Insert the power cord into a outdoor
extension cord.
2. Secure, as in Fig. 8, or use the cord holder.
Starting/Stopping the Mower
Do not start the motor in tall grass.
Switch ON:
Press the button (Fig. 9) on the
combined switch/plug first and keep it down until
you pull the switch bar back. You can now release
the button while continuing to hold the switch
bar.
Switch OFF:
Release the switch bar.
NOTE:
While mowing, lay the connection cable
safely on footpaths and on areas which have
already been cut.
Collection Bag
The collection bag has two functions in this
machine.
1. If the collection bag is empty or is not full
with grass, the full collection window will be
open. (Fig. 10)
2. If the collection bag is full with grass the full collection window will close. (Fig. 10)
WARNING
When the motor has been switched off, the blade continues running for several seconds
therefore do not touch the underside of the mower until the blade has come to a
standstill!
WARNING
Before performing any maintenance or cleaning work, Always pull out the mains plug!
Mowing Tips
NOTE:
A sharp blade will greatly enhance the performance of the mower, especially when cutting
high grass.
Be sure to check the blade and to sharpen it at least once per year, as described in the Mainte-
nance section.
• Verify that the lawn is free of stones, sticks, wires and other objects that could damage the
blades or the motor. These objects could be accidentally thrown by the mower in any
direction, and could cause serious personal injury to the operator and to others.
• In order to prevent electric shock, do not operate the mower in damp or wet conditions.
• Do not mow in a circle. Travel back and forth across the lawn. (Fig. 1)
• When cutting thick grass, reduce walking speed in order to allow for a more effective cut and
a proper discharge of the clippings. For a healthy lawn, always cut off one-third or less of the
total length of the grass. The average lawn should be approximately 1 1/2 to 2" (3.8 to 5 cm)
long during cool months, and more than 2” (5 cm) long during hot months. If there is growth,
the lawn should be cut in the fall.
• While cutting, ensure that the electric cable is always behind you and on the area of grass
already cut. The lawn will look better if it is always cut to the same height and in alternate
directions.
WARNING
If you strike a foreign object, stop the motor and disconnect the
power cord. Thoroughly inspect the mower for any damage. Repair
any damage before operating the mower.
16
ADJUSTMENT
model no. 060-0181-8
I
contact us: 1-844-428-7277
