background image

This CERTIFIED  product is guaranteed 

from  the  date  of  original

 

for a period of 1 year

retail  purchase

 

against defects in: 

a)  a bill of sale verifying the purchase and purchase date must be provided;
b) this warranty will not apply to any product or part thereof which is worn or 

broken or which has become inoperative due to abuse, misuse, accidental 

or which is being used for industrial, professional, commercial or rental 

c) this warranty will not apply to normal wear and tear or to expendable parts 

 or accessories that may be supplied with the product That are expected 

to become inoperative or unusable after a reasonable period of use; 

d) this warranty will not apply to routine maintenance and consumable items 

such as, but not limited to, fuel, lubricants, vacuum bags, blades, belts, 

e) this warranty will not apply where damage is caused by repairs made or 

attempted by others (i.e. persons not authorized by the manufacturer);

f)  this warranty will not apply to any product that was sold to the original purchaser 

 as a reconditioned or refurbished product (unless otherwise specified in writing); 

g)  this warranty will not apply to any product or part thereof if any part from another 

manufacturer is installed therein or any repairs or alterations have been made or 

attempted by unauthorized persons;

h)  this warranty will not apply to normal deterioration of the exterior finish, such as, 

but not limited to, scratches, dents, paint chips, or to any corrosion or discolouring
by heat, abrasive and chemical cleaners; and

i)  this warranty will not apply to component parts sold by and identified as the  

product of

 

another

 

company, which shall be covered under the product 

Additional limitations

This warranty applies only to the original purchaser and may not be transferred. 
Neither the retailer nor the manufacturer shall be liable for any other expense, 
loss or damage, including

w

i

t

h

o

u

t

 

limitation, any indirect, incidental, consequential 

 or exemplary damages arising in connection with the sale, use or inability to 

This warranty gives you specific legal rights, and you may have other rights, which may 

 vary from province to

 

province. The provisions contained in this warranty are not

intended to limit, modify, take away from, disclaim

 

or exclude any statutory warranties 

 set forth in any applicable provincial or federal legislation.

19

20

W

A

R

R

A

N

TY

W

A

R

R

A

N

TY

These warranties are subject to the following conditions and 
limitations: 

damage, neglect or lack of proper installation, operation or maintenance 
(as outlined in the applicable owner’s manual or operating instructions)  

purposes; 

sandpaper, bits, fluids, tune-ups or adjustments; 

manufacturer’s warranty,

 

if

 

any

.

Notice

 

to

 

consumer

use or inability to use this product.

MADE IN CHINA
IMPORTED BY
TRILEAF DISTRIBUTION TRIFEUIL TORONTO, CANADA M4S 2B8

model number 054-5847-8 

TM

Subject to the conditions and limitations described below, this product, if 
returned to us with proof of purchase within the stated warranty period and 
if covered under this warranty, will be repaired or replaced (with the same model, 
or one of equal value or specification), at our option. We will bear the cost of any 
repair or replacement and any costs of labour relating thereto.

Summary of Contents for 054-5847-8












Reviews: