background image

 

WARNING!

 This product produces an electromagnetic field during operation! This field may 

under some circumstances interfere with active or passive medical implants! To reduce the 

risk of serious or fatal injury, it recommends persons with medical implants to consult their 

physician and the medical implant manufacturer before operating this product! 
 

Vibration and Noise Reduction 

To reduce the impact of noise and vibration emission, limit the time of operation, use low-

vibration and low-noise operating modes as well as wear personal protective equipment. 
 

Emergency 

Familiarise yourself with the use of this product using this instruction manual. Memorise the 

safety directions and follow them at all times. This will help to prevent risks and hazards. 

 

Always be alert when using this product, so that you can recognise and handle 

risks early. Fast intervention can prevent serious injury and damage to property. 

 

Stop the motor and disconnect the battery from the product if there is any 

malfunction. Have the product checked by a qualified professional and repaired, if 

necessary, before you put it into operation again. 

 

Safety Warnings and Instructions when using with battery pack (not supplied) 

 

Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, 

puncture, or shred.  

 

Do not modify or remanufacture, attempt to insert foreign objects into the battery, 

immerse or expose to water or other liquids, or expose to fire, excessive heat 

including soldering irons, or put in microwave oven.  

 

Only use the battery/tool with a charging system specified by the 

manufacturer/supplier.  

 

Do not short-circuit a battery or allow metallic or conductive objects to contact 

both battery terminals simultaneously.  

 

Dispose of used batteries promptly according to the manufacturer/supplier’s 

instructions.  

 

Improper battery/tool use may result in a fire, explosion, or other hazard.  

 

Battery/tool usage by children should be supervised.  

 

Safety Warnings and Instructions for when using with charger (not supplied) 

 

This manual contains important safety and operating instructions.  

 

Before using battery charger, read all instructions and cautionary warnings on 

battery charger and product using battery. CAUTION: To reduce the risk of injury, 

use this charger only with this product. Batteries in other products may burst 

causing personal injury or damage.  

 

Do not expose charger to rain or snow.  

Summary of Contents for POWERPLUS CT20VLNTRMA

















Reviews: