Certa POWERPLUS CT20VGRNDRA, User Manual

Page: 9 / 16

Adjusting the grinding guard
1. Loosen the screw on the guard with a suitable screwdriver. Do not undo until the
screw is removed completely.
2. Adjust the guard to a position that still protects you from flying sparks.
3. Fasten the screw.
Installing the grinding disc
1. Make sure the guard is securely in place.
2. Place the inner flange on the spindle. Ensure it is aligned on the two flats.
3. Check the rated speed on the grinding disc. Do not use a disc with a rated speed
lower than the speed shown on the tool label.
4. Fit the disc onto the spindle over the inner flange.
5. Press the spindle lock button to prevent movement of the spindle.
6. Keep the lock button pressed in and tighten the threaded outer flange by turning
the lock nut wrench.