b. (optional): Force Start Function
First please make sure that the clamps are connected to the correct polarity battery
terminal. Then, hold the force start button for 3 seconds to start your car. When the indicator
light of the smart clamp is solid green, you need to start the vehicle within 30 seconds.
Step 4
Once your car is started, remove the battery clamp from the car battery and the jump starter
within 30 seconds.
LED Indicators
Indicator
Situation
The red/green light will
flash
Ready to work
The green light is
always on
Work status
The red light is always
on
1. Battery clamp is reversely connected.
- Check whether the clamp is reversely connected.
2. The clamp is short-circuited.
- Check whether two clamps together connect or connect
both clamps to the same piece of metal.
The red light flashes
slowly
Reverse charging protection, the voltage of the car battery is
higher than 12.6V.
-No jump starter needed, the car battery is enough to start
your car.
The red light flashes
quickly
The temperature of the clamp exceeds 65(+/-5) degrees.
-Remove the clamp until the red/green light flash
The green light flashes
slowly
The voltage of the jump starter is too low.
-Try to replace the jump starter or charge it in time.
