3
Safety Information:
•
When using the electrical appliance, basic safety precautions should always be
followed to reduce the risk of fire, electrical shock and injury to persons, including
the following:
•
Do not attempt to plug in or remove the appliances from the power supply with
wet hands.
•
Before connecting the appliance to the power supply ensure the voltage
corresponds to the voltage limits on the rating plate.
•
Warning! A reverse polarity connection will result in a blown fuse and may cause
permanent damage to the appliance. Note: The tip of the plug is positive (+) and
the side contact is negative (-).
•
This appliance should not be operated by means of an external timer or separate
remote-control system, other than any supplied with the appliance.
•
Only use manufacturer recommended attachments or those specifically designed
for use with the unit.
•
On some vehicles, the accessory socket may only become live when the ignition is
turned on.
•
Warning! Do not use with positive ground electrical systems (i.e. older vehicles).
•
To reduce the risk of fire, ensure that the 12V DC outlets are free from debris. When
the adapter plug is fitted, make sure that it is a tight connection.
•
Do not operate the appliance if it has been submerged in water or any other liquid
to prevent against electric shock, damage and potential injury.
•
Do not use the appliance if the connector or its supply cord is damaged. Seek
advice and repairs from qualified electricians or service personnel.
•
Only a qualified electrician or service engineer should perform repairs to electrical
equipment. Improper repairs may place the user at serious risk.
•
Do not leave the appliance unattended whilst connected to the mains power
supply.
•
This appliance can be used for periods of up to 30 minutes without noticeably
affecting the power of a normally charged car battery which is in good condition.
•
Warning! Extended use will drain the battery power.
Do not run the vehicles engine while using the 12V impact wrench as this can shorten the life
of the appliance. Before attempting any cleaning or user maintenance, the appliance must be
switched off and disconnected from the power supply. The connector must be disconnected,
and the appliance should be cool enough to touch, and all moving parts must have stopped.
Safety symbols:
The following safety symbols may appear on this product. Please ensure you understand their
meanings before operating this tool in order to prevent personal injury and avoid damage to
the tool.
Use precaution
for your safety
Instruction manual
to
read and
understand
Risk of injury.
Keep hands at a
safe distance
Unsuitable weather.
Do not use in wet
conditions
Protective gloves
must be worn when
handling tools
Ear protection
must be worn
Eye protection
must be worn
