Handle-Button and Operation
•
ON/OFF: Power Switch
•
SM: Store data. When pressed, the data on the display will be stored. Up to five records
can be stored at a time, and will be displayed as M1, M2, M3, M4 and M5.
•
RM: Recall data. If you store 5 metres at M1 and 10 metres at M2, but the current
measurement is at 120.7m, pressing RM once will display the data for M1 and "R" will
appear in the top right corner. After 2 seconds, it will revert back to the current
measurement (see table 1 below). If you press the RM button twice, it will display the
data for M2 for 2 seconds, then will revert back to the current measurement (see table 2,
below).
•
CLR: Delete current data. When pressed, it will delete the data currently measured.
Table 1
Current Data
Press RM Once
After 2 seconds
Table 2
Current Data
Press RM Twice
After 2 seconds
CLR: Delete Data
SM: Store Data
Digital Display
ON/OFF: Power Switch
RM: Recall Data
Displayed Data:
Converts between Metric
and Imperial System
Power
Stored Data
Measurement
Metric System
Imperial System
