1.
Attach the positive battery charger leads (red) to the positive connecting terminal of
the battery, indicated by “P” or “+”.
2.
Attach the negative battery charger leads (black) to the negative connecting
terminal of the battery, indicated by “N” or “–”.
3.
Plug your trainer charger unit into a domestic power socket. The charger may take up
to about 7 seconds to determine if a 6V or 12V battery is being connected. The
charging indicator will then illuminate, and the battery will begin charging.
4.
When the full indicator illuminates, the battery is completely charged. The charger
will then switch to the floating operation mode (periodically charging to maintain a
100% charge).
5.
Unplug the power cord to turn the charger off.
Charging current
1.0A
Battery voltages supported 6V/1A, 12V/1A
Battery capacity
Suitable for 4.0Ah – 120Ah lead-acid batteries
Charges batteries of 6V/1A and 12V/1A
OPERATION
Note:
Ensure good contact is made between the crocodile clips and the connecting
terminals.
SPECIFICATIONS
Note:
The battery charger automatically will switch to standby if the direct current
cable clamps are removed from while the power cord is still connected to power.
