your left hand on the housing and put one foot against the base plate to
prevent it slipping.
•
Pull the starter grip slowly with your right hand to 20cm and give it a brisk
strong pull.
•
Do not pull the starter rope all the way out, as it may break.
•
Do not let the starter grip snap back.
•
Guide it slowly back into the housing so that the starter rope can rewind
properly.
When the engine begins to fire
•
If the engine is cold, open the choke and
continue cranking until engine runs.
•
If the engine is warm, continue cranking until
engine runs.
When engine is running
•
Move the lever to the center position so that the engine settles down to
idle speed.
Stopping the engine
•
Move the lever to “0” and the engine will shut down.
If the engine does not start
•
If you do not open the choke, quickly enough after the engine begins to
fire, the engine will stop.
•
Remove the spark plug.
•
Unscrew and dry the spark plug.
•
Set the stop switch to OFF.
•
Pull the starter rope several times to clear the combustion chamber.
•
Fit the spark plug and reconnect the spark plug cap.
•
Move the stop switch to ON.
•
Open the choke, even if the engine is cold.
•
Now try again to restart the engine.
Fuel tank has run dry and has then been refuelled
•
Pull the starter rope at least 10 times.
8
Stop Switch
Stop
Start
Summary of Contents for CT33CLFBLWA
Page 1: ......