SAVE THESE INSTRUCTIONS
Some of these symbols may be used on the tool. Please study the symbols and learn their
meanings. Proper interpretation of these symbols will allow you to operate the tool better.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
min
Minutes
Time
Alternating Current
Type of Current
Direct Current
Characteristic of Current
No Load Speed
Rotational speed at no load (no resistance)
Class II Construction
Double-insulated construction
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc..., per
minute.
Wet Conditions Alert
Do not expose to rain or use in damp locations
Read Operators Manual
To reduce the risk of injury, user must read and
understand the operators manual before using this
product.
Eye Protection
Always wear safety goggles or safety glasses with
side shields and a full face shield when operating this
product.
Safety Alert
Precautions that involve your safety.
No Hands Symbol
Failure to keep your hands away from the blade may
result in serious person injury.
Hot Surface
To avoid the risk of injury or damage, avoid contact
with any hot surface.
Safety Instructions
General Safety
WARNING
: When using electric appliances, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and personal injury.
Avoid dangerous environments
– don't use appliances in damp or wet locations.
Don't use in rain
.
Use the correct appliance
– do not use unit for any job except for that for which it is intended.
Don't overreach
– keep proper footing and balance at all times.
Start alert
– watch what you are doing. Use common sense. Do not operate the appliance when
you are tired.
2
