background image

automatically cut off power to the air compressor if internal operating 
temperatures rise above save levels during use.

Should the air compressor automatically shut down at any point during use, do 
not attempt to restart the air compressor. Turn off the power switch. The 
automatic thermal overload protector will automatically reset when the internal 
temperature drops down to a safe level. After allowing the air compressor to 
cool off for about 20 minutes, you can safely resume usage of the air compressor
by turning on the power switch – your warranty will be void if this instruction is 
not followed.

It is strongly recommended that you keep the vehicle engine running while using 
the battery to prevent discharge of your vehicle battery. The means you would 
ONLY OPERATE THE COMPRESSOR IN WELL VENTILATED AREAS. Compressor
performance is also enhanced when operating with the vehicle engine running.

Please not that you may experience a slight delay (about 30 seconds) to the 
compressor motor starting when the compressor is pressurised (i.e. when there is
back pressure in the line). This is a normal delayed reaction, not a compressor 
ON/OFF switch malfunction.

Operating Instructions

Tyre Inflation and Deflation

Before attaching the air compressor power cord to the 12 volt DC power source, check 
to make sure that the power switch is in the off position. Attach the red battery clamp 
to the positive terminal of the battery and the black battery clamp to the negative 
terminal of the battery, ensuring you have made a good connection. Always keep your 
vehicle engine running while operating the compressor to avoid draining the vehicle 
battery.

Always make sure that the portable compressor's 5 metre power cord is uncoiled and 
fully extended to avoid overheating of the power cord.

Your air compressor is moisture and dust resistant. The air compressor is equipped with
a sand tray that will allow you to place the air compressor on soft sand during use. 
Never expose the compressor to water while running.

Make sure the air compressor is sitting upright while operating. Do not operate if the air
compressor is not sitting up. Avoid tugging on the air compressor or the cord. Lift the 
air compressor up and carry it to the side of the vehicle where the tyres you are 
inflating are situated.

Operation Instructions

The air compressor comes with heavy heat resistant hose with a quick 
connection stud, while the deflater comes with an extension coil hose quick 
coupler.  Simple attach this multi-function extension hose coil to the leader hose
and you are ready to inflate tyres.
This in-line deflater/inflater hose can be used for both pumping air and deflating
tyres. Please familiarise yourself with the following information regarding the 
different functions available.

Reviews: