Cerrowire ReelRover, User'S Manual And Operating Instructions

Page: 26 / 48

26
Set Gearbox to PARK
Once the ReelRover is in position and the take-
up machine’s centerline is aligned with the ReelRover
take-up adaptor, set both gearboxes to PARK as shown in Figure 31 to ensure that the ReelRover
gearboxes are free spinning during loading of the wire onto the reel.
Figure 31: Gearshift in PARK
Operate the take-
up machine as outlined in the manufacturer’s machine manual.
Wemco 2800-series Shafted Take-up Machine
To load wire onto the ReelRover with shafted take-up equipment requires removal of the take-up machine
shaft, and use of a left-hand take-up adaptor. Use the following procedure to safely load the ReelRover.
WARNING : NEVER USE THE TAKE-UP EQUIPMENT AND ADAPTOR TO LIFT THE REELROVER
AS IT MAY RESULT IN SERIOUS INJURIES.
Figure 32: Wemco 2800 Shafted Take-up Machine